+91 89566 06830 / +91 84110 01865 info@bhavyam.com Pune, Maharashtra, India
Bhavyam Engineering Technologies Pvt. Ltd.

Flow Metering Solutions

Precision & Reliability Driven Engineering Solutions

View Products

Precision parts, built in-house.

Flow elements, manifolds and instrumentation fittings engineered and manufactured at our Pune facility.

BETFLOW products →
Steam flow meter — socket-weld hook-up assembly
1
● FLOW METERING

Steam Flow Meter

Orifice-Based Steam Flow Metering System — for saturated & superheated steam applications

  • Primary element sized using CONVAL calculation per ISO 5167 for accurate, repeatable measurement.
  • Condensate pots, manifolds (BETLOCK) and impulse piping engineered for high-temperature steam service.
  • Mass flow computation with density compensation from measured temperature and pressure.
Enquire →
BETFLOW orifice plate assembly
2
● BETFLOW

Orifice Plate Assemblies

Concentric, eccentric, segmental and quarter-circle designs

  • Cost-effective flow measurement for clean fluids
  • Simple design, easy to install
  • Available in single and multi-hole types
Enquire →
Gas flow meter — biogas metering assembly
3
● FLOW METERING

Gas Flow Meter

Compact Orifice-Based Gas Flow Metering System — for natural gas, biogas, compressed air & other dry gases

  • Sized for actual operating pressure, temperature and gas composition for corrected mass / standard-volume flow.
  • Averaging pitot tube option for large ducts and low-pressure-drop installations.
  • BETLOCK manifolds and BETFITT fittings supplied as a complete impulse loop.
Enquire →
BETFLOW averaging pitot tube
4
● BETFLOW

Averaging Pitot Tubes

Low permanent pressure loss for large ducts and pipes

  • Low permanent pressure loss design
  • Easy retrofit into existing pipelines
  • Suited for large-diameter pipes and ducts
Enquire →
Stack flow meter — auto-purge averaging pitot tube assembly
5
● FLOW METERING

Stack Flow Meter

Averaging Pitot Tube (APT) Based Stack Flow Metering System — for flue gas & industrial monitoring

  • Multi-port averaging sensor for representative velocity measurement across the duct profile.
  • Negligible pressure loss — suited to induced / forced draft and low-pressure systems.
  • Retractable / hot-tap mounting options for installation without shutdown (application dependent).
Enquire →
BETFLOW venturi tube
6
● BETFLOW

Venturi Tubes

Lower permanent pressure loss for aggressive media

  • High accuracy with minimal pressure loss
  • Ideal for custody transfer applications
  • Handles high flow rates efficiently
Enquire →
Condensate and water flow meter — complete DP measurement loop
7
● FLOW METERING

Condensate / Water Flow Meter

Orifice Plate Based Water Flow Metering System — complete assembly with impulse piping, manifold, transmitter & totalizer

  • Eccentric / segmental orifice options for condensate with entrained impurities.
  • Venturi tubes for high turndown and low-loss feed-water measurement.
  • Air-vented manifold mounting to keep impulse lines liquid-filled and accurate.
Enquire →
BETFLOW flow nozzle
8
● BETFLOW

Flow Nozzles

High-pressure steam, gas and water applications

  • Suited for high-velocity steam and gas
  • Withstands high pressure and temperature service
  • Lower permanent pressure loss than orifices
Enquire →
AGA compliant gas flow meter — spooled orifice assembly
9
● FLOW METERING

AGA Compliant Gas Flow Meter

AGA-Compliant Orifice Gas Flow Metering System (Honed Metering Pipes with Flow Straightener & Multivariable Transmitter)

  • Orifice plate, carrier and metering tube built to AGA Report No. 3 / API MPMS 14.3 dimensional tolerances with honed-bore metering pipes.
  • Integral flow straightener with AGA-3 straight-run compliance for swirl-free, repeatable flow profile.
  • Multivariable transmitter with AGA-8 compressibility compensation for mass, standard-volume and energy flow.
Enquire →
BETFLOW wedge meter
10
● BETFLOW

Wedge Meters

Non-clogging DP measurement for viscous and slurry services

  • Non-clogging design for slurries and solids
  • Handles high-viscosity and bi-phase fluids
  • Resists erosion in abrasive services
Enquire →
BETFLOW cone meter
11
● BETFLOW

Cone Meters

Compact cone design for tight installations and multiphase flows

  • Accurate at low Reynolds numbers
  • Requires minimal upstream straight-pipe length
  • Suited for compact, space-constrained installations
Enquire →
BETFLOW aerofoil
12
● BETFLOW

Aerofoils

Self-averaging profile for reliable duct flow measurement

  • Suited for large ducts and stacks
  • Low permanent pressure loss design
  • Ideal for HVAC and fan flow
Enquire →

ABOUT BHAVYAM

Founded in 2009 by Mr. Jayant Kulkarni, a field instrumentation industry veteran with over 35+ years of experience, Bhavyam was built with a clear purpose: to engineer highly reliable flow metering solutions for the most demanding and critical process applications.

Bhavyam Engineering Technologies Pvt. Ltd. specializes in the design, manufacture, and supply of precision differential pressure flow metering solutions, including Orifice Plate Assemblies, Flow Nozzles, Venturi Tubes, Averaging Pitot Tubes, Wedge Meters, V-Cone Meters, and Aerofoils, along with Restriction Orifice Assemblies and Instrument Manifolds.

Our strength lies in an unwavering commitment to rigorous manufacturing standards and stringent quality control at every stage of production, ensuring that every product we deliver meets the highest benchmarks of accuracy, durability, and performance — consistently, every single time.

Read More

CORPORATE VIDEO

Bhavyam Engineering precision manufacturing facility in Pune

Bhavyam · Pune Facility

Bhavyam // by the numbers

Built on trust, backed by experience.

MOD·01 — Service years

16 + Years in Instrumentation

MOD·02 — People

60 + Qualified engineers & professionals

MOD·03 — Clientele

500 + Industrial clients globally

Certified to global standards.

All certificates →

View all certificates →

FOUNDER MESSAGE

Our journey began as system integrators for field instrumentation products, working closely with customers to understand their process measurement challenges.

That understanding led us to start our own manufacturing facility, with a small, dedicated team of engineers and a clear mission: to provide our customers with best-in-class flow metering solutions and to build relationships that last well beyond a single transaction. What started as a small team has today grown into a 60+ member strong organization, but the spirit we started with remains unchanged.

Mr. Jayant Kulkarni Founder & MD - Bhavyam Engineering Technologies Pvt Ltd.

Read more
Mr. Jayant Kulkarni, Founder & Managing Director of Bhavyam Engineering Technologies