2 Valve Manifold manufacturers in Pune

2 Valve Manifolds

Bhavyam Manufactures a wide range of 2 Valve Instrument Manifolds, providing the perfect interface between Process & Measuring instruments. BETLOCK Manifolds are designed to protect & enhance the availability of expensive instrumentation investments.

The use of a comprehensive range of wetted materials makes it most suitable for challenging processes which include Power/Chemical/ Petrochemicals/Oil and Gas etc. We can design and manufacture manifolds according to specific process requirements.

Integral Mounting (Block & bleed/ T- Type, H- Type, Coplanar/ vertical flange design) Remote Mounting (Pipe to Pipe- NPT F)

Body Material: Stainless Steel (SS 304, SS 306, SS 306 L), Duplex Stainless Steel, Hastelloy-C. Titanium, Monel, Carbon Steel)
Process/ Instrument Connection: 1/2″ NPT (M/F), 1/2″ BSP (M/F), Flanged according to IEC61518/B / DIN 19213.
Gland Packing: Standard PTFE, Graphoil, PEEK.
Seat MOC: Same as Body Material, Soft Seat PTFE, Soft Seat PEEK
Drain/Vent Valve: 1/4″ NPT (F) with Body MOC Plug, 1/4″ NPT (F) without Plug

Single piece forging construction provides maximum strength.
Pressure Rating- 400 Barg (6000 PSI).
Optional seat material available with PTFE and
PMI test certificate provided with manifold
Self rotating ball spindle provides 100% leak
Manifolds can be supplied with variety of MOC for Body, Stem, Trim, Glands
Low torque T bar handle provides ease of
Dust cap provided to protect gland seal from dust & ingress of
All manifolds are with 100% factory tested with certified test

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Configuration

Integral Mounting (Block & bleed/ T- Type, H- Type, Coplanar/ vertical flange design) Remote Mounting (Pipe to Pipe- NPT F)

Body Material :- Stainless Steel (SS 304, SS 306, SS 306 L), Duplex Stainless Steel, Hastelloy-C. Titanium, Monel, Carbon Steel)
Process/ Instrument Connection :- 1/2″ NPT (M/F), 1/2″ BSP (M/F), Flanged according to IEC61518/B / DIN 19213.
Gland Packing :- Standard PTFE, Graphoil, PEEK.
Seat MOC :- Same as Body Material, Soft Seat PTFE, Soft Seat PEEK
Drain/Vent Valve :- 1/4″ NPT (F) with Body MOC Plug, 1/4″ NPT (F) without Plug